Finished products bulk steel silo project

Jiangsu Liangyou Zhengda Co., Ltd is a professional enterprise engaged in steel silo equipment and storage engineering technology research, development, design, manufacturing and related products sales & service.  Steel silo engineering could be applied in: food industry, feed industry, oil industry, building materials industry, brewing industry and port industry. FDSP is specialized in design, manufacture, installation for both domestic and foreign helix silo and bolt silo project.

Introduction about bolt silo:

fabricated by good quality hot-dip galvanized steel sheet(mass of Zn coat could be: 275g/㎡、350g/㎡、450g/), adopt full automatic corrugated plate production line. The diameter of bolt silo could varied from φ2.75m toφ27.5m, height of straight part could varied from 1.12m to 20.16m, the storage volume could varied from 11m³ to 13333m³.

Temperature measuring system, ventilation system, indicator level system, circulation fumigation system inside the silo could be optional according to customer's need.

Based on the carried material, the silo could be divided into: maize steel silo, soybean steel silo, wheat steel silo, barley steel silo, sorghum steel silo, soybean meal steel silo, sawdust steel silo, biomass pellet steel silo. Also we can customized flour steel silo, cement steel silo, building materials steel silo;

Based on the hopper type, the silo could be divided into: concrete flat bottom steel silo, concrete cone hopper steel silo, steel structure support steel silo(single silo capacity should less than 1500T) .

Finished products bulk steel silo project

Project instruction:

This project is Finished products bulk steel silo project, the technological characteristics are as follows:

The main materials in silo are products from previous production line such as feed pellets(or mesh feed), biomass pellet, material in large silo .

The main process: lifting and into silo-storage-discharging

Bucket elevator speed could be equipped according to the processing line

The silo capacity usually is 70m³~400m³

Manual gate and motorized gate is equipped on the silo bottom to adjust discharging speed and also be convenient to maintenance 

Features of the engineering process design:

Steel base support of silo is steel structure platform , easy to maintenance and move and reconstruction in future;

High and low level indicator are equipped for silo which can alarm when full and empty;

Manual gate and motorized gate is special equipped for outlet, manual gate could control the discharging flow, at the same time when the motorized gate need to be dissembled to maintained, the manual gate could be stopped temporarily .

Other instructions:

For different projects and different customer requirements, the process will be also different, the following could be options during the process design:

1)There are two bulk silo in this process, customer could add or decrease the silo quantity and capacity as their needs

2)We can install our packing system under the silo if customer need to pack in bulk

3)The support platform could be designed as concrete structure according to customer's needs

4)Customers can choose helix silo or bolt silo according to their own needs.



대표전화: +86 519 8830 9988 / 6826 6288

기술문의: +86 519 8830 5688 / 6826 6588

주소1: 장쑤(江苏)성 리양(溧阳)시 장쑤 중관춘 과학기술 산업단지 첸양로 6번길.

주소2: 장쑤(江苏)성 리양(溧阳)시 쿤룬가 홍승로 558번길 (장쑤 중관춘 과학기술 산업단지내).

Copyright © Jiangsu Liangyou Zhengda Co., Ltd. (FDSP) 판권 소유.